nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone
Summary
| CVE | CVE-2026-89482 |
| State | PUBLISHED |
| Assigner | Linux |
| Source Priority | CVE Program / NVD first with legacy fallback |
| Published | 2026-09-11 20:19:29 UTC |
| Updated | 2026-09-11 20:19:29 UTC |
| Description | In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone
Commit 25e5cb780e62 ("nvme-tcp: fix possible crash in write_zeroes
processing") established that blk_rq_payload_bytes() must not be read
without first checking blk_rq_nr_phys_segments(), and recorded the
result in nvme_tcp_setup_cmd_pdu() as req->data_len. The receive side
was left as it was.
The two differ for REQ_OP_WRITE_ZEROES, which has no physical segments
but a non-zero blk_rq_bytes(), so setup leaves req->iter untouched
while the receive gate lets a C2HData through and nvme_tcp_recv_data()
copies into whatever the previous command on that tag left there. The
driver-private area is zeroed only when the tag set is allocated.
Reproduced with a test target that leaves a residual iterator on a tag
and then sends a C2HData for a WRITE_ZEROES command on the same tag:
BUG: KASAN: wild-memory-access in _copy_to_iter+0x642/0x1330
Write of size 512 at addr ffe728c2175dfa81 by task kworker/0:1H/103
CPU: 0 UID: 0 PID: 103 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nvme_tcp_wq nvme_tcp_io_work
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
kasan_report+0xce/0x100
? _copy_to_iter+0x642/0x1330
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x3c/0x60
_copy_to_iter+0x642/0x1330
? __pfx_sock_has_perm+0x10/0x10
? worker_thread+0x45b/0xd10
? __pfx__copy_to_iter+0x10/0x10
? _raw_spin_lock_bh+0x83/0xe0
? __pfx__raw_spin_lock_bh+0x10/0x10
__skb_datagram_iter+0xf3/0x820
? __pfx_simple_copy_to_iter+0x10/0x10
? __asan_memcpy+0x3c/0x60
? skb_copy_bits+0x58d/0x830
skb_copy_datagram_iter+0x37/0x120
nvme_tcp_recv_skb+0xa07/0x4320
? __pfx_nvme_tcp_recv_skb+0x10/0x10
__tcp_read_sock+0x1ab/0x810
? __pfx_nvme_tcp_recv_skb+0x10/0x10
? __pfx_lock_sock_nested+0x10/0x10
? __pfx___tcp_read_sock+0x10/0x10
nvme_tcp_try_recv+0x152/0x1e0
? __pfx_nvme_tcp_try_recv+0x10/0x10
? __pfx_mutex_unlock+0x10/0x10
nvme_tcp_io_work+0x1e4/0x6c0
? __schedule+0x181a/0x49f0
? __pfx_nvme_tcp_io_work+0x10/0x10
process_one_work+0x633/0x1030
Keep the blk_rq_payload_bytes() test and add req->data_len to it. The
old test is what rejects a C2HData naming a tag that is no longer in
flight, because blk_update_request() zeroes rq->__data_len on
completion; req->data_len and req->curr_bio are driver-private and
survive completion, so they cannot stand in for it. Setup initialises
the iterator only when both req->curr_bio and req->data_len are set, so
the gate now tests the same two. |
Vendor Declared Affected Products
| Source | Vendor | Product | Version | Platforms |
|---|
| CNA |
Linux |
Linux |
affected 25e5cb780e62bde432b401f312bb847edc78b432 b36161701cb366f416afdcf70771d432a7c74753 git |
Not specified |
| CNA |
Linux |
Linux |
affected 25e5cb780e62bde432b401f312bb847edc78b432 6a01b58263108eaf9869bb6f82f07709240c6589 git |
Not specified |
| CNA |
Linux |
Linux |
affected 25e5cb780e62bde432b401f312bb847edc78b432 641ad3a30ba560f0a9a610376c568d7b75d2a2aa git |
Not specified |
| CNA |
Linux |
Linux |
affected 25e5cb780e62bde432b401f312bb847edc78b432 3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36 git |
Not specified |
| CNA |
Linux |
Linux |
affected f507ae6e33cbe56c4e3fe000434fc0ecc263d098 git |
Not specified |
| CNA |
Linux |
Linux |
affected b1458c16f4e26e87492e58e4d24a1873bd09232a git |
Not specified |
| CNA |
Linux |
Linux |
affected 5.4.36 5.5 semver |
Not specified |
| CNA |
Linux |
Linux |
affected 5.6.8 5.7 semver |
Not specified |
| CNA |
Linux |
Linux |
affected 5.7 |
Not specified |
| CNA |
Linux |
Linux |
unaffected 5.7 semver |
Not specified |
| CNA |
Linux |
Linux |
unaffected 6.12.109 6.12.* semver |
Not specified |
| CNA |
Linux |
Linux |
unaffected 6.18.50 6.18.* semver |
Not specified |
| CNA |
Linux |
Linux |
unaffected 7.2.4 7.2.* semver |
Not specified |
| CNA |
Linux |
Linux |
unaffected 7.3-rc1 * original_commit_for_fix |
Not specified |
References
| Reference | Source | Link | Tags |
|---|
| git.kernel.org/stable/c/b36161701cb366f416afdcf70771d432a7c74753 |
416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
git.kernel.org |
|
| git.kernel.org/stable/c/3a4aa9e6ad3e35f8e24d5eaf38ee4d437075fb36 |
416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
git.kernel.org |
|
| git.kernel.org/stable/c/641ad3a30ba560f0a9a610376c568d7b75d2a2aa |
416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
git.kernel.org |
|
| git.kernel.org/stable/c/6a01b58263108eaf9869bb6f82f07709240c6589 |
416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
git.kernel.org |
|
| CVE Program record |
CVE.ORG |
www.cve.org |
canonical |
| NVD vulnerability detail |
NVD |
nvd.nist.gov |
canonical, analysis |
No vendor comments have been submitted for this CVE.
There are currently no legacy QID mappings associated with this CVE.