{"api_version":"1","generated_at":"2026-10-21T22:12:12+00:00","cve":"CVE-2026-19676","urls":{"html":"https://cve.report/CVE-2026-19676","api":"https://cve.report/api/cve/CVE-2026-19676.json","docs":"https://cve.report/api","cve_org":"https://www.cve.org/CVERecord?id=CVE-2026-19676","nvd":"https://nvd.nist.gov/vuln/detail/CVE-2026-19676"},"summary":{"title":"PECI transfer syscall verifier does not validate embedded user buffer pointers, allowing arbitrary kernel memory read/write from user mode","description":"The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver.\n\nEvery in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus.\n\nThe impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device.\n\nThe fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length.","state":"PUBLISHED","assigner":"zephyr","published_at":"2026-10-21 19:17:02","updated_at":"2026-10-21 19:17:02"},"problem_types":["CWE-822","CWE-822 memory-safety"],"metrics":[{"version":"3.1","source":"vulnerabilities@zephyrproject.org","type":"Secondary","score":"7.8","severity":"HIGH","vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","data":{"version":"3.1","vectorString":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","baseScore":7.8,"baseSeverity":"HIGH","attackVector":"LOCAL","attackComplexity":"LOW","privilegesRequired":"LOW","userInteraction":"NONE","scope":"UNCHANGED","confidentialityImpact":"HIGH","integrityImpact":"HIGH","availabilityImpact":"HIGH"}},{"version":"3.1","source":"CNA","type":"CVSS","score":"7.8","severity":"HIGH","vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","data":{"baseScore":7.8,"baseSeverity":"HIGH","vectorString":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","version":"3.1"}}],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/d7faf323d52b7e8845a63b1f854a82bdda44c261","name":"https://github.com/zephyrproject-rtos/zephyr/commit/d7faf323d52b7e8845a63b1f854a82bdda44c261","refsource":"vulnerabilities@zephyrproject.org","tags":[],"title":"","mime":"","httpstatus":"","archivestatus":"0"},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-g66q-frxm-3hfg","name":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-g66q-frxm-3hfg","refsource":"vulnerabilities@zephyrproject.org","tags":[],"title":"","mime":"","httpstatus":"","archivestatus":"0"},{"url":"https://www.cve.org/CVERecord?id=CVE-2026-19676","name":"CVE Program record","refsource":"CVE.ORG","tags":["canonical"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-19676","name":"NVD vulnerability detail","refsource":"NVD","tags":["canonical","analysis"]}],"affected":[{"source":"CNA","vendor":"zephyrproject","product":"zephyr","version":"affected 2.3.0 4.4.2 semver","platforms":[]}],"timeline":[],"solutions":[],"workarounds":[],"exploits":[],"credits":[],"nvd_cpes":[],"vendor_comments":[],"enrichments":{"kev":null,"epss":null,"legacy_qids":[]},"source_records":{"cve_program":{"containers":{"cna":{"affected":[{"collectionURL":"https://github.com/zephyrproject-rtos/zephyr","defaultStatus":"unaffected","packageName":"zephyr","product":"zephyr","programFiles":["drivers/peci/peci_handlers.c"],"programRoutines":[{"name":"z_vrfy_peci_transfer"}],"vendor":"zephyrproject","versions":[{"lessThanOrEqual":"4.4.2","status":"affected","version":"2.3.0","versionType":"semver"}]}],"descriptions":[{"lang":"en","value":"The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver.\n\nEvery in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus.\n\nThe impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device.\n\nThe fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length."}],"metrics":[{"cvssV3_1":{"baseScore":7.8,"baseSeverity":"HIGH","vectorString":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","version":"3.1"},"format":"CVSS"}],"problemTypes":[{"descriptions":[{"cweId":"CWE-822","description":"memory-safety","lang":"en","type":"CWE"}]}],"providerMetadata":{"dateUpdated":"2026-10-21T18:19:27.767Z","orgId":"e2e69745-5e70-4e92-8431-deb5529a81ad","shortName":"zephyr"},"references":[{"name":"Fix commit","tags":["patch"],"url":"https://github.com/zephyrproject-rtos/zephyr/commit/d7faf323d52b7e8845a63b1f854a82bdda44c261"},{"name":"GHSA-g66q-frxm-3hfg","url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-g66q-frxm-3hfg"}],"title":"PECI transfer syscall verifier does not validate embedded user buffer pointers, allowing arbitrary kernel memory read/write from user mode","x_generator":{"engine":"cvelib 1.8.0"}}},"cveMetadata":{"assignerOrgId":"e2e69745-5e70-4e92-8431-deb5529a81ad","assignerShortName":"zephyr","cveId":"CVE-2026-19676","datePublished":"2026-10-21T18:19:27.767Z","dateReserved":"2026-08-12T22:25:11.381Z","dateUpdated":"2026-10-21T18:19:27.767Z","state":"PUBLISHED"},"dataType":"CVE_RECORD","dataVersion":"5.2"},"nvd":{"publishedDate":"2026-10-21 19:17:02","lastModifiedDate":"2026-10-21 19:17:02","problem_types":["CWE-822","CWE-822 memory-safety"],"metrics":{"cvssMetricV31":[{"source":"vulnerabilities@zephyrproject.org","type":"Secondary","cvssData":{"version":"3.1","vectorString":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H","baseScore":7.8,"baseSeverity":"HIGH","attackVector":"LOCAL","attackComplexity":"LOW","privilegesRequired":"LOW","userInteraction":"NONE","scope":"UNCHANGED","confidentialityImpact":"HIGH","integrityImpact":"HIGH","availabilityImpact":"HIGH"},"exploitabilityScore":1.8,"impactScore":5.9}]},"configurations":[]},"legacy_mitre":{"record":{"CveYear":"2026","CveId":"19676","Ordinal":"1","Title":"PECI transfer syscall verifier does not validate embedded user b","CVE":"CVE-2026-19676","Year":"2026"},"notes":[{"CveYear":"2026","CveId":"19676","Ordinal":"1","NoteData":"The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver.\n\nEvery in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus.\n\nThe impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device.\n\nThe fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length.","Type":"Description","Title":"PECI transfer syscall verifier does not validate embedded user b"}]}}}