{"api_version":"1","generated_at":"2026-10-27T07:13:07+00:00","cve":"CVE-2026-80745","urls":{"html":"https://cve.report/CVE-2026-80745","api":"https://cve.report/api/cve/CVE-2026-80745.json","docs":"https://cve.report/api","cve_org":"https://www.cve.org/CVERecord?id=CVE-2026-80745","nvd":"https://nvd.nist.gov/vuln/detail/CVE-2026-80745"},"summary":{"title":"regulator: fp9931: Fix VPOS/VNEG voltage selector table","description":"In the Linux kernel, the following vulnerability has been resolved:\n\nregulator: fp9931: Fix VPOS/VNEG voltage selector table\n\nThe VPOSNEG_table[] mapping does not match the FP9931 datasheet.\n\nThe datasheet defines the VPOS/VNEG voltage mapping as:\n\n  00h-04h ->  7.04V (-7.04V)\n  05h     ->  7.26V (-7.26V)\n  06h     ->  7.49V (-7.49V)\n  ...\n  28h-3Fh -> 15.06V (-15.06V)\n\nHowever, VPOSNEG_table[] has two issues:\n\n1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the\n   table has 6 entries of 7.04V, causing all subsequent entries to be\n   shifted by one position.\n\n2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but\n   the table has only 41 entries. Any selector value above 0x28\n   would result in an out-of-bounds table access.\n\nFix both issues by removing the duplicate 7.04V entry and appending\nthe missing 23 clamped 15.06V entries, bringing the table to the\ncorrect size of 64 entries (0x00~0x3F).","state":"PUBLISHED","assigner":"Linux","published_at":"2026-09-03 13:06:14","updated_at":"2026-09-04 05:17:14"},"problem_types":[],"metrics":[{"version":"3.1","source":"416baaa9-dc9f-4396-8d5f-8c081fb06d67","type":"Secondary","score":"8.4","severity":"HIGH","vector":"CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","data":{"version":"3.1","vectorString":"CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","baseScore":8.4,"baseSeverity":"HIGH","attackVector":"LOCAL","attackComplexity":"LOW","privilegesRequired":"NONE","userInteraction":"NONE","scope":"UNCHANGED","confidentialityImpact":"HIGH","integrityImpact":"HIGH","availabilityImpact":"HIGH"}},{"version":"3.1","source":"CNA","type":"DECLARED","score":"8.4","severity":"HIGH","vector":"CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","data":{"baseScore":8.4,"baseSeverity":"HIGH","vectorString":"CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","version":"3.1"}}],"references":[{"url":"https://git.kernel.org/stable/c/92a9594053831bf4c5886519688e155912befaee","name":"https://git.kernel.org/stable/c/92a9594053831bf4c5886519688e155912befaee","refsource":"416baaa9-dc9f-4396-8d5f-8c081fb06d67","tags":[],"title":"","mime":"","httpstatus":"","archivestatus":"0"},{"url":"https://git.kernel.org/stable/c/66694b5f90f3876fccb87bbd02b453cdc33b3ae4","name":"https://git.kernel.org/stable/c/66694b5f90f3876fccb87bbd02b453cdc33b3ae4","refsource":"416baaa9-dc9f-4396-8d5f-8c081fb06d67","tags":[],"title":"","mime":"","httpstatus":"","archivestatus":"0"},{"url":"https://www.cve.org/CVERecord?id=CVE-2026-80745","name":"CVE Program record","refsource":"CVE.ORG","tags":["canonical"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-80745","name":"NVD vulnerability detail","refsource":"NVD","tags":["canonical","analysis"]}],"affected":[{"source":"CNA","vendor":"Linux","product":"Linux","version":"affected 12d821bd13d42e6de3ecb1c13918b1f06a3ee213 92a9594053831bf4c5886519688e155912befaee git","platforms":[]},{"source":"CNA","vendor":"Linux","product":"Linux","version":"affected 12d821bd13d42e6de3ecb1c13918b1f06a3ee213 66694b5f90f3876fccb87bbd02b453cdc33b3ae4 git","platforms":[]},{"source":"CNA","vendor":"Linux","product":"Linux","version":"affected 6.19","platforms":[]},{"source":"CNA","vendor":"Linux","product":"Linux","version":"unaffected 6.19 semver","platforms":[]},{"source":"CNA","vendor":"Linux","product":"Linux","version":"unaffected 7.1.10 7.1.* semver","platforms":[]},{"source":"CNA","vendor":"Linux","product":"Linux","version":"unaffected 7.2 * original_commit_for_fix","platforms":[]}],"timeline":[],"solutions":[],"workarounds":[],"exploits":[],"credits":[],"nvd_cpes":[],"vendor_comments":[],"enrichments":{"kev":null,"epss":{"cve_year":"2026","cve_id":"80745","cve":"CVE-2026-80745","epss":"0.001220000","percentile":"0.022480000","score_date":"2026-09-07","updated_at":"2026-09-08 00:05:27"},"legacy_qids":[]},"source_records":{"cve_program":{"containers":{"cna":{"affected":[{"defaultStatus":"unaffected","product":"Linux","programFiles":["drivers/regulator/fp9931.c"],"repo":"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git","vendor":"Linux","versions":[{"lessThan":"92a9594053831bf4c5886519688e155912befaee","status":"affected","version":"12d821bd13d42e6de3ecb1c13918b1f06a3ee213","versionType":"git"},{"lessThan":"66694b5f90f3876fccb87bbd02b453cdc33b3ae4","status":"affected","version":"12d821bd13d42e6de3ecb1c13918b1f06a3ee213","versionType":"git"}]},{"defaultStatus":"affected","product":"Linux","programFiles":["drivers/regulator/fp9931.c"],"repo":"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git","vendor":"Linux","versions":[{"status":"affected","version":"6.19"},{"lessThan":"6.19","status":"unaffected","version":"0","versionType":"semver"},{"lessThanOrEqual":"7.1.*","status":"unaffected","version":"7.1.10","versionType":"semver"},{"lessThanOrEqual":"*","status":"unaffected","version":"7.2","versionType":"original_commit_for_fix"}]}],"cpeApplicability":[{"nodes":[{"cpeMatch":[{"criteria":"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*","versionEndExcluding":"7.1.10","versionStartIncluding":"6.19","vulnerable":true},{"criteria":"cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*","versionEndExcluding":"7.2","versionStartIncluding":"6.19","vulnerable":true}],"negate":false,"operator":"OR"}]}],"descriptions":[{"lang":"en","value":"In the Linux kernel, the following vulnerability has been resolved:\n\nregulator: fp9931: Fix VPOS/VNEG voltage selector table\n\nThe VPOSNEG_table[] mapping does not match the FP9931 datasheet.\n\nThe datasheet defines the VPOS/VNEG voltage mapping as:\n\n  00h-04h ->  7.04V (-7.04V)\n  05h     ->  7.26V (-7.26V)\n  06h     ->  7.49V (-7.49V)\n  ...\n  28h-3Fh -> 15.06V (-15.06V)\n\nHowever, VPOSNEG_table[] has two issues:\n\n1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the\n   table has 6 entries of 7.04V, causing all subsequent entries to be\n   shifted by one position.\n\n2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but\n   the table has only 41 entries. Any selector value above 0x28\n   would result in an out-of-bounds table access.\n\nFix both issues by removing the duplicate 7.04V entry and appending\nthe missing 23 clamped 15.06V entries, bringing the table to the\ncorrect size of 64 entries (0x00~0x3F)."}],"metrics":[{"cvssV3_1":{"baseScore":8.4,"baseSeverity":"HIGH","vectorString":"CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","version":"3.1"},"scenarios":[{"lang":"en","value":"AV:L - The flaw is in the FP9931/JD9930 I2C EPD PMIC driver reached only via local regulator core paths (regulator_set_voltage, get_voltage_sel, map_voltage_ascend/list_voltage_table) during probe and display power management; there is no network, Bluetooth, or physical-bus attack surface to this code.\nAC:L - On affected e-reader hardware the undersized VPOSNEG_table (41 vs 64 hardware selectors with vsel_mask 0x3F) makes selector values above 0x28 deterministically index past the table whenever map_voltage or list_voltage processes those selectors; no race or attacker-uncontrollable memory layout is required.\nPR:N - Regulator constraint application during fp9931_probe and automatic EPD/display regulator enable paths run at boot and during normal framebuffer updates without authentication; no CAP_SYS_ADMIN, init-namespace root, or special capability is checked before reaching the vulnerable voltage-mapping code.\nUI:N - Once the FP9931 PMIC is present, voltage selection is driven by kernel probe and display refresh without requiring a victim to mount a filesystem, click a link, or perform any cooperative action beyond normal device operation.\nS:U - Impact is confined to kernel memory reads and PMIC voltage programming within the host kernel security boundary on embedded e-reader platforms; this is not a VM escape, IOMMU bypass, or cross-container authority change.\nC:H - Out-of-bounds indexing of VPOSNEG_table[] in regulator_list_voltage_table reads adjacent kernel .rodata beyond the 41-entry array when selectors 0x29-0x3F are processed; out-of-bounds kernel reads are rated High per CVSS kernel guidance.\nI:H - The shifted voltage table causes regulator_map_voltage_ascend to select wrong VPOS/VNEG selectors written to PMIC registers (up to ±15.06V rails), and OOB table reads can return attacker-influencing values used for subsequent voltage programming, enabling incorrect high-voltage output.\nA:H - Out-of-bounds table access in kernel context can trigger oops or panic on misaligned rodata boundaries, and programming incorrect ±15V EPD rail voltages can hang, reset, or permanently damage display power hardware, matching High availability impact guidance."}]}],"providerMetadata":{"dateUpdated":"2026-09-04T04:58:25.988Z","orgId":"416baaa9-dc9f-4396-8d5f-8c081fb06d67","shortName":"Linux"},"references":[{"url":"https://git.kernel.org/stable/c/92a9594053831bf4c5886519688e155912befaee"},{"url":"https://git.kernel.org/stable/c/66694b5f90f3876fccb87bbd02b453cdc33b3ae4"}],"title":"regulator: fp9931: Fix VPOS/VNEG voltage selector table","x_generator":{"engine":"bippy-1.2.0"}}},"cveMetadata":{"assignerOrgId":"416baaa9-dc9f-4396-8d5f-8c081fb06d67","assignerShortName":"Linux","cveId":"CVE-2026-80745","datePublished":"2026-09-03T08:26:27.739Z","dateReserved":"2026-08-26T14:34:25.790Z","dateUpdated":"2026-09-04T04:58:25.988Z","state":"PUBLISHED"},"dataType":"CVE_RECORD","dataVersion":"5.2"},"nvd":{"publishedDate":"2026-09-03 13:06:14","lastModifiedDate":"2026-09-04 05:17:14","problem_types":[],"metrics":{"cvssMetricV31":[{"source":"416baaa9-dc9f-4396-8d5f-8c081fb06d67","type":"Secondary","cvssData":{"version":"3.1","vectorString":"CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H","baseScore":8.4,"baseSeverity":"HIGH","attackVector":"LOCAL","attackComplexity":"LOW","privilegesRequired":"NONE","userInteraction":"NONE","scope":"UNCHANGED","confidentialityImpact":"HIGH","integrityImpact":"HIGH","availabilityImpact":"HIGH"},"exploitabilityScore":2.5,"impactScore":5.9}]},"configurations":[]},"legacy_mitre":{"record":{"CveYear":"2026","CveId":"80745","Ordinal":"1","Title":"regulator: fp9931: Fix VPOS/VNEG voltage selector table","CVE":"CVE-2026-80745","Year":"2026"},"notes":[{"CveYear":"2026","CveId":"80745","Ordinal":"1","NoteData":"In the Linux kernel, the following vulnerability has been resolved:\n\nregulator: fp9931: Fix VPOS/VNEG voltage selector table\n\nThe VPOSNEG_table[] mapping does not match the FP9931 datasheet.\n\nThe datasheet defines the VPOS/VNEG voltage mapping as:\n\n  00h-04h ->  7.04V (-7.04V)\n  05h     ->  7.26V (-7.26V)\n  06h     ->  7.49V (-7.49V)\n  ...\n  28h-3Fh -> 15.06V (-15.06V)\n\nHowever, VPOSNEG_table[] has two issues:\n\n1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the\n   table has 6 entries of 7.04V, causing all subsequent entries to be\n   shifted by one position.\n\n2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but\n   the table has only 41 entries. Any selector value above 0x28\n   would result in an out-of-bounds table access.\n\nFix both issues by removing the duplicate 7.04V entry and appending\nthe missing 23 clamped 15.06V entries, bringing the table to the\ncorrect size of 64 entries (0x00~0x3F).","Type":"Description","Title":"regulator: fp9931: Fix VPOS/VNEG voltage selector table"}]}}}