{"api_version":"1","generated_at":"2026-11-18T01:20:45+00:00","cve":"CVE-2026-85035","urls":{"html":"https://cve.report/CVE-2026-85035","api":"https://cve.report/api/cve/CVE-2026-85035.json","docs":"https://cve.report/api","cve_org":"https://www.cve.org/CVERecord?id=CVE-2026-85035","nvd":"https://nvd.nist.gov/vuln/detail/CVE-2026-85035"},"summary":{"title":"Use-after-free via dynamically allocated message queue retained by the CAN RX filter","description":"The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_msgq * as user_data. The controller driver stores that raw pointer in its filter table and dereferences it from the RX path every time a matching frame arrives. The system call verifier z_vrfy_can_add_rx_filter_msgq() in drivers/can/can_handlers.c validated the queue only with K_SYSCALL_OBJ(), which is a point-in-time check of type, initialization and caller permission and says nothing about the object's lifetime.\n\nOn a build with CONFIG_USERSPACE=y and CONFIG_DYNAMIC_OBJECTS=y, an unprivileged user-mode thread that has been granted access to a CAN device can obtain a message queue whose lifetime it fully controls: k_object_alloc(K_OBJ_MSGQ) followed by k_msgq_alloc_init(). The lifetime of such an object is driven solely by its permission bitmask, and a pointer retained by the kernel is not represented there. After registering the filter, the thread calls k_object_release() — or simply terminates — and unref_check() frees the struct k_msgq storage while the CAN driver still holds the pointer.\n\nThe next matching CAN frame causes k_msgq_put() to run in supervisor context against freed memory that the attacker can have groomed with another kernel allocation: the frame payload is memcpy()d through the reused block's write_ptr, and the queue's wait_q (and poll_events under CONFIG_POLL) list nodes are manipulated. This yields kernel-heap corruption reachable from a user-mode thread, defeating the isolation CONFIG_USERSPACE is intended to provide; the same dangling pointer also arises benignly when an application thread exits without calling can_remove_rx_filter().\n\nThe fix validates the queue with K_SYSCALL_OBJ_STATIC(), which additionally rejects objects carrying K_OBJ_FLAG_ALLOC, so only statically defined queues (CAN_MSGQ_DEFINE()) may be registered from user mode. Supervisor-mode callers bypass the verifier and must themselves keep the queue valid until the filter is removed.","state":"PUBLISHED","assigner":"zephyr","published_at":"2026-11-03 14:17:39","updated_at":"2026-11-03 19:18:11"},"problem_types":["CWE-416","CWE-416 use-after-free"],"metrics":[{"version":"3.1","source":"vulnerabilities@zephyrproject.org","type":"Secondary","score":"8.8","severity":"HIGH","vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H","data":{"version":"3.1","vectorString":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H","baseScore":8.8,"baseSeverity":"HIGH","attackVector":"LOCAL","attackComplexity":"LOW","privilegesRequired":"LOW","userInteraction":"NONE","scope":"CHANGED","confidentialityImpact":"HIGH","integrityImpact":"HIGH","availabilityImpact":"HIGH"}},{"version":"3.1","source":"CNA","type":"CVSS","score":"8.8","severity":"HIGH","vector":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H","data":{"baseScore":8.8,"baseSeverity":"HIGH","vectorString":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H","version":"3.1"}}],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-6pxv-r7ww-3g2q","name":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-6pxv-r7ww-3g2q","refsource":"vulnerabilities@zephyrproject.org","tags":[],"title":"","mime":"","httpstatus":"","archivestatus":"0"},{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/0114bee266211c72a49f3b6a914d3eaf821dd460","name":"https://github.com/zephyrproject-rtos/zephyr/commit/0114bee266211c72a49f3b6a914d3eaf821dd460","refsource":"vulnerabilities@zephyrproject.org","tags":[],"title":"","mime":"","httpstatus":"","archivestatus":"0"},{"url":"https://www.cve.org/CVERecord?id=CVE-2026-85035","name":"CVE Program record","refsource":"CVE.ORG","tags":["canonical"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-85035","name":"NVD vulnerability detail","refsource":"NVD","tags":["canonical","analysis"]}],"affected":[{"source":"CNA","vendor":"zephyrproject","product":"zephyr","version":"affected 1.14.0 4.3.2 semver","platforms":[]},{"source":"CNA","vendor":"zephyrproject","product":"zephyr","version":"affected 4.4.0 4.5.0 semver","platforms":[]}],"timeline":[],"solutions":[],"workarounds":[],"exploits":[],"credits":[],"nvd_cpes":[],"vendor_comments":[],"enrichments":{"kev":null,"epss":null,"legacy_qids":[]},"source_records":{"cve_program":{"containers":{"adp":[{"metrics":[{"other":{"content":{"id":"CVE-2026-85035","options":[{"Exploitation":"none"},{"Automatable":"no"},{"Technical Impact":"total"}],"role":"CISA Coordinator","timestamp":"2026-11-03T18:13:02.862531Z","version":"2.0.3"},"type":"ssvc"}}],"providerMetadata":{"dateUpdated":"2026-11-03T18:13:21.688Z","orgId":"134c704f-9b21-4f2e-91b3-4a467353bcc0","shortName":"CISA-ADP"},"title":"CISA ADP Vulnrichment"}],"cna":{"affected":[{"collectionURL":"https://github.com/zephyrproject-rtos/zephyr","defaultStatus":"unaffected","packageName":"zephyr","product":"zephyr","programFiles":["drivers/can/can_common.c","drivers/can/can_handlers.c","include/zephyr/drivers/can.h"],"programRoutines":[{"name":"can_msgq_put"},{"name":"z_impl_can_add_rx_filter_msgq"},{"name":"z_vrfy_can_add_rx_filter_msgq"}],"vendor":"zephyrproject","versions":[{"lessThan":"4.3.2","status":"affected","version":"1.14.0","versionType":"semver"},{"lessThan":"4.5.0","status":"affected","version":"4.4.0","versionType":"semver"}]}],"descriptions":[{"lang":"en","value":"The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_msgq * as user_data. The controller driver stores that raw pointer in its filter table and dereferences it from the RX path every time a matching frame arrives. The system call verifier z_vrfy_can_add_rx_filter_msgq() in drivers/can/can_handlers.c validated the queue only with K_SYSCALL_OBJ(), which is a point-in-time check of type, initialization and caller permission and says nothing about the object's lifetime.\n\nOn a build with CONFIG_USERSPACE=y and CONFIG_DYNAMIC_OBJECTS=y, an unprivileged user-mode thread that has been granted access to a CAN device can obtain a message queue whose lifetime it fully controls: k_object_alloc(K_OBJ_MSGQ) followed by k_msgq_alloc_init(). The lifetime of such an object is driven solely by its permission bitmask, and a pointer retained by the kernel is not represented there. After registering the filter, the thread calls k_object_release() — or simply terminates — and unref_check() frees the struct k_msgq storage while the CAN driver still holds the pointer.\n\nThe next matching CAN frame causes k_msgq_put() to run in supervisor context against freed memory that the attacker can have groomed with another kernel allocation: the frame payload is memcpy()d through the reused block's write_ptr, and the queue's wait_q (and poll_events under CONFIG_POLL) list nodes are manipulated. This yields kernel-heap corruption reachable from a user-mode thread, defeating the isolation CONFIG_USERSPACE is intended to provide; the same dangling pointer also arises benignly when an application thread exits without calling can_remove_rx_filter().\n\nThe fix validates the queue with K_SYSCALL_OBJ_STATIC(), which additionally rejects objects carrying K_OBJ_FLAG_ALLOC, so only statically defined queues (CAN_MSGQ_DEFINE()) may be registered from user mode. Supervisor-mode callers bypass the verifier and must themselves keep the queue valid until the filter is removed."}],"metrics":[{"cvssV3_1":{"baseScore":8.8,"baseSeverity":"HIGH","vectorString":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H","version":"3.1"},"format":"CVSS"}],"problemTypes":[{"descriptions":[{"cweId":"CWE-416","description":"use-after-free","lang":"en","type":"CWE"}]}],"providerMetadata":{"dateUpdated":"2026-11-03T13:36:08.995Z","orgId":"e2e69745-5e70-4e92-8431-deb5529a81ad","shortName":"zephyr"},"references":[{"name":"Fix commit","tags":["patch"],"url":"https://github.com/zephyrproject-rtos/zephyr/commit/0114bee266211c72a49f3b6a914d3eaf821dd460"},{"name":"GHSA-6pxv-r7ww-3g2q","url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-6pxv-r7ww-3g2q"}],"title":"Use-after-free via dynamically allocated message queue retained by the CAN RX filter","x_generator":{"engine":"cvelib 1.8.0"}}},"cveMetadata":{"assignerOrgId":"e2e69745-5e70-4e92-8431-deb5529a81ad","assignerShortName":"zephyr","cveId":"CVE-2026-85035","datePublished":"2026-11-03T13:36:08.995Z","dateReserved":"2026-09-02T20:23:18.000Z","dateUpdated":"2026-11-03T18:13:21.688Z","state":"PUBLISHED"},"dataType":"CVE_RECORD","dataVersion":"5.2"},"nvd":{"publishedDate":"2026-11-03 14:17:39","lastModifiedDate":"2026-11-03 19:18:11","problem_types":["CWE-416","CWE-416 use-after-free"],"metrics":{"cvssMetricV31":[{"source":"vulnerabilities@zephyrproject.org","type":"Secondary","cvssData":{"version":"3.1","vectorString":"CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H","baseScore":8.8,"baseSeverity":"HIGH","attackVector":"LOCAL","attackComplexity":"LOW","privilegesRequired":"LOW","userInteraction":"NONE","scope":"CHANGED","confidentialityImpact":"HIGH","integrityImpact":"HIGH","availabilityImpact":"HIGH"},"exploitabilityScore":2,"impactScore":6}],"ssvcV203":[{"source":"134c704f-9b21-4f2e-91b3-4a467353bcc0","ssvcData":{"timestamp":"2026-11-03T18:13:02.862531Z","id":"CVE-2026-85035","options":[{"exploitation":"none"},{"automatable":"no"},{"technicalImpact":"total"}],"role":"CISA Coordinator","version":"2.0.3"}}]},"configurations":[]},"legacy_mitre":{"record":{"CveYear":"2026","CveId":"85035","Ordinal":"1","Title":"Use-after-free via dynamically allocated message queue retained ","CVE":"CVE-2026-85035","Year":"2026"},"notes":[{"CveYear":"2026","CveId":"85035","Ordinal":"1","NoteData":"The can_add_rx_filter_msgq() system call installs a CAN RX filter whose callback (can_msgq_put() in drivers/can/can_common.c) is handed the caller's struct k_msgq * as user_data. The controller driver stores that raw pointer in its filter table and dereferences it from the RX path every time a matching frame arrives. The system call verifier z_vrfy_can_add_rx_filter_msgq() in drivers/can/can_handlers.c validated the queue only with K_SYSCALL_OBJ(), which is a point-in-time check of type, initialization and caller permission and says nothing about the object's lifetime.\n\nOn a build with CONFIG_USERSPACE=y and CONFIG_DYNAMIC_OBJECTS=y, an unprivileged user-mode thread that has been granted access to a CAN device can obtain a message queue whose lifetime it fully controls: k_object_alloc(K_OBJ_MSGQ) followed by k_msgq_alloc_init(). The lifetime of such an object is driven solely by its permission bitmask, and a pointer retained by the kernel is not represented there. After registering the filter, the thread calls k_object_release() — or simply terminates — and unref_check() frees the struct k_msgq storage while the CAN driver still holds the pointer.\n\nThe next matching CAN frame causes k_msgq_put() to run in supervisor context against freed memory that the attacker can have groomed with another kernel allocation: the frame payload is memcpy()d through the reused block's write_ptr, and the queue's wait_q (and poll_events under CONFIG_POLL) list nodes are manipulated. This yields kernel-heap corruption reachable from a user-mode thread, defeating the isolation CONFIG_USERSPACE is intended to provide; the same dangling pointer also arises benignly when an application thread exits without calling can_remove_rx_filter().\n\nThe fix validates the queue with K_SYSCALL_OBJ_STATIC(), which additionally rejects objects carrying K_OBJ_FLAG_ALLOC, so only statically defined queues (CAN_MSGQ_DEFINE()) may be registered from user mode. Supervisor-mode callers bypass the verifier and must themselves keep the queue valid until the filter is removed.","Type":"Description","Title":"Use-after-free via dynamically allocated message queue retained "}]}}}