{"api_version":"1","generated_at":"2026-11-16T23:53:53+00:00","cve":"CVE-2026-93669","urls":{"html":"https://cve.report/CVE-2026-93669","api":"https://cve.report/api/cve/CVE-2026-93669.json","docs":"https://cve.report/api","cve_org":"https://www.cve.org/CVERecord?id=CVE-2026-93669","nvd":"https://nvd.nist.gov/vuln/detail/CVE-2026-93669"},"summary":{"title":"NULL pointer dereference in the ITE IT8xxx2 SHI host-command backend when a host transaction arrives before backend initialization","description":"The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).\n\nIf the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.\n\nThe result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.\n\nThe fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.","state":"PUBLISHED","assigner":"zephyr","published_at":"2026-11-16 22:18:26","updated_at":"2026-11-16 22:18:26"},"problem_types":["CWE-476","CWE-476 memory-safety"],"metrics":[{"version":"3.1","source":"vulnerabilities@zephyrproject.org","type":"Secondary","score":"4.7","severity":"MEDIUM","vector":"CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H","data":{"version":"3.1","vectorString":"CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H","baseScore":4.7,"baseSeverity":"MEDIUM","attackVector":"LOCAL","attackComplexity":"HIGH","privilegesRequired":"LOW","userInteraction":"NONE","scope":"UNCHANGED","confidentialityImpact":"NONE","integrityImpact":"NONE","availabilityImpact":"HIGH"}},{"version":"3.1","source":"CNA","type":"CVSS","score":"4.7","severity":"MEDIUM","vector":"CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H","data":{"baseScore":4.7,"baseSeverity":"MEDIUM","vectorString":"CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H","version":"3.1"}}],"references":[{"url":"https://github.com/zephyrproject-rtos/zephyr/commit/73c6a4ed9506ca81ddfb9d89197b74425a8ce632","name":"https://github.com/zephyrproject-rtos/zephyr/commit/73c6a4ed9506ca81ddfb9d89197b74425a8ce632","refsource":"vulnerabilities@zephyrproject.org","tags":[],"title":"","mime":"","httpstatus":"","archivestatus":"0"},{"url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xqxg-8rx7-42hq","name":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xqxg-8rx7-42hq","refsource":"vulnerabilities@zephyrproject.org","tags":[],"title":"","mime":"","httpstatus":"","archivestatus":"0"},{"url":"https://www.cve.org/CVERecord?id=CVE-2026-93669","name":"CVE Program record","refsource":"CVE.ORG","tags":["canonical"]},{"url":"https://nvd.nist.gov/vuln/detail/CVE-2026-93669","name":"NVD vulnerability detail","refsource":"NVD","tags":["canonical","analysis"]}],"affected":[{"source":"CNA","vendor":"zephyrproject","product":"zephyr","version":"affected 3.4.0 4.3.2 semver","platforms":[]},{"source":"CNA","vendor":"zephyrproject","product":"zephyr","version":"affected 4.4.0 4.5.0 semver","platforms":[]}],"timeline":[],"solutions":[],"workarounds":[],"exploits":[],"credits":[],"nvd_cpes":[],"vendor_comments":[],"enrichments":{"kev":null,"epss":null,"legacy_qids":[]},"source_records":{"cve_program":{"containers":{"cna":{"affected":[{"collectionURL":"https://github.com/zephyrproject-rtos/zephyr","defaultStatus":"unaffected","packageName":"zephyr","product":"zephyr","programFiles":["subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c"],"programRoutines":[{"name":"shi_ite_init_registers"},{"name":"shi_ite_int_handler"},{"name":"shi_ite_parse_header"}],"vendor":"zephyrproject","versions":[{"lessThan":"4.3.2","status":"affected","version":"3.4.0","versionType":"semver"},{"lessThan":"4.5.0","status":"affected","version":"4.4.0","versionType":"semver"}]}],"descriptions":[{"lang":"en","value":"The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).\n\nIf the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.\n\nThe result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.\n\nThe fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm."}],"metrics":[{"cvssV3_1":{"baseScore":4.7,"baseSeverity":"MEDIUM","vectorString":"CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H","version":"3.1"},"format":"CVSS"}],"problemTypes":[{"descriptions":[{"cweId":"CWE-476","description":"memory-safety","lang":"en","type":"CWE"}]}],"providerMetadata":{"dateUpdated":"2026-11-16T21:19:17.897Z","orgId":"e2e69745-5e70-4e92-8431-deb5529a81ad","shortName":"zephyr"},"references":[{"name":"Fix commit","tags":["patch"],"url":"https://github.com/zephyrproject-rtos/zephyr/commit/73c6a4ed9506ca81ddfb9d89197b74425a8ce632"},{"name":"GHSA-xqxg-8rx7-42hq","url":"https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xqxg-8rx7-42hq"}],"title":"NULL pointer dereference in the ITE IT8xxx2 SHI host-command backend when a host transaction arrives before backend initialization","x_generator":{"engine":"cvelib 1.8.0"}}},"cveMetadata":{"assignerOrgId":"e2e69745-5e70-4e92-8431-deb5529a81ad","assignerShortName":"zephyr","cveId":"CVE-2026-93669","datePublished":"2026-11-16T21:19:17.897Z","dateReserved":"2026-09-18T13:48:54.198Z","dateUpdated":"2026-11-16T21:19:17.897Z","state":"PUBLISHED"},"dataType":"CVE_RECORD","dataVersion":"5.2"},"nvd":{"publishedDate":"2026-11-16 22:18:26","lastModifiedDate":"2026-11-16 22:18:26","problem_types":["CWE-476","CWE-476 memory-safety"],"metrics":{"cvssMetricV31":[{"source":"vulnerabilities@zephyrproject.org","type":"Secondary","cvssData":{"version":"3.1","vectorString":"CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H","baseScore":4.7,"baseSeverity":"MEDIUM","attackVector":"LOCAL","attackComplexity":"HIGH","privilegesRequired":"LOW","userInteraction":"NONE","scope":"UNCHANGED","confidentialityImpact":"NONE","integrityImpact":"NONE","availabilityImpact":"HIGH"},"exploitabilityScore":1,"impactScore":3.6}]},"configurations":[]},"legacy_mitre":{"record":{"CveYear":"2026","CveId":"93669","Ordinal":"1","Title":"NULL pointer dereference in the ITE IT8xxx2 SHI host-command bac","CVE":"CVE-2026-93669","Year":"2026"},"notes":[{"CveYear":"2026","CveId":"93669","Ordinal":"1","NoteData":"The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).\n\nIf the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.\n\nThe result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.\n\nThe fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.","Type":"Description","Title":"NULL pointer dereference in the ITE IT8xxx2 SHI host-command bac"}]}}}