NULL pointer dereference in the ITE IT8xxx2 SHI host-command backend when a host transaction arrives before backend initialization
Summary
| CVE | CVE-2026-93669 |
|---|---|
| State | PUBLISHED |
| Assigner | zephyr |
| Source Priority | CVE Program / NVD first with legacy fallback |
| Published | 2026-11-16 22:18:26 UTC |
| Updated | 2026-11-16 22:18:26 UTC |
| Description | The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80). If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself. The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows. The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm. |
Risk And Classification
Primary CVSS: v3.1 4.7 MEDIUM from [email protected]
CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
Problem Types: CWE-476 | CWE-476 memory-safety
| Version | Source | Type | Score | Severity | Vector |
|---|---|---|---|---|---|
| 3.1 | [email protected] | Secondary | 4.7 | MEDIUM | CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H |
| 3.1 | CNA | CVSS | 4.7 | MEDIUM | CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H |
CVSS v3.1 Breakdown
Attack Vector
LocalAttack Complexity
HighPrivileges Required
LowUser Interaction
NoneScope
UnchangedConfidentiality
NoneIntegrity
NoneAvailability
HighCVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H
Vendor Declared Affected Products
| Source | Vendor | Product | Version | Platforms |
|---|---|---|---|---|
| CNA | Zephyrproject | Zephyr | affected 3.4.0 4.3.2 semver | Not specified |
| CNA | Zephyrproject | Zephyr | affected 4.4.0 4.5.0 semver | Not specified |
References
| Reference | Source | Link | Tags |
|---|---|---|---|
| github.com/zephyrproject-rtos/zephyr/commit/73c6a4ed9506ca81ddfb9d89197b... | [email protected] | github.com | |
| github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-xqxg-8rx7-... | [email protected] | github.com | |
| CVE Program record | CVE.ORG | www.cve.org | canonical |
| NVD vulnerability detail | NVD | nvd.nist.gov | canonical, analysis |
No vendor comments have been submitted for this CVE.
There are currently no legacy QID mappings associated with this CVE.